The gasification process at 900 °C turns dried organic waste and residues into flammable gas and a small percentage of biochar
The syngas can be used to generate heat and power, thus reducing energy bills and creating additional revenues.
By displacing fossil fuels-based energy and producing biochar, you can achieve a remarkable carbon footprint reduction and sequester Carbon.
The production and transformation of agricultural products, as well as the anaerobic digestion processes aimed at generating biogas and biomethane, inevitably lead to the generation of large amounts of by-products: branches, prunings, process waste, digestate… These by-products often remain unused and generate a disposal cost, beyond impacting negatively on the environment because of the direct and indirect emissions associated with traditional disposal practices.
SyngaSmart allows to reduce or eliminate such cost and transform it into revenue, recovering the residual energy content left in the byproducts. In fact, by pre-treating them through a drying and densification process, residues can become a valuable resource for generating:
Use our plant configurator and discover the value of your biomass or how to optimize your energy expenditure
PowerSkid is the skid-mounted, forklift ready version of SyngaSmart cogeneration plants.
Available from 50 to 200 kWe in combined heat and power configuration, or as PowerSkid HEAT (150 kWth), it is a compact system including all the necessary equipment: feedstock hopper, up to 4 gasification units, gas cleaning and cooling, automatic biochar extraction, single or double genset with thermal recovery, electrical panel and management software.
| PowerSkid 50 | PowerSkid 100 | PowerSkid 200 | PowerSkid HEAT | |
|---|---|---|---|---|
| Electric Power | 50 kWe | 100 kWe | 200 kWe | – |
| Thermal Power | 73 kWth | 146 kWth | 292 kWth | 150 kWh |
| Biochar | 4,2 kg/h | 8,4 kg/h | 16,8 kg/h | 4,2 kg/h |
| Biomass Consumption | 60 kg/h | 120 kg/h | 240 kg/h | 60 kg/h |
| Dimensions | Skid 3.5×2.4 (m) | Skid 3.7 x 2.4 (m) + Container 10′ [3 x 2.4 x 2.9 m] | Skid 7.4×2.4 (m) + Container 30′ [9.1 x 2.4 x 2.9 m] | Skid 3.5×2.4 (m) |
CHP is the containerized SyngaSmart version, designed for outdoor installations and maximum plant protection.
Available from 50 to 200 kWe in combined heat and power configuration, or as HEAT version (150 kWth), it includes: biomass tank, feedstock hopper, up to 4 gasification units, gas cleaning and cooling, automatic biochar extraction, single or double genset with thermal recovery, electrical panel and management software. The modular design allows to customize the whole installation with pre-treatment modules and accessories, according to the specific application requirements.
| CHP 50 | CHP 100 | CHP 200 | HEAT | |
|---|---|---|---|---|
| Electric Power | 50 kWe | 100 kWe | 200 kWe | – |
| Thermal Power | 73 kWth | 146 kWth | 292 kWth | 150 kWh |
| Biochar | 4,2 kg/h | 8,4 kg/h | 16,8 kg/h | 4,2 kg/h |
| Biomass Consumption | 60 kg/h | 120 kg/h | 240 kg/h | 60 kg/h |
| Dimensions | Container 20′ [6.1 x 2.4 x 2.6 m] | Container 20′ [6.1 x 2.4 x 2.6 m] + Container 10′ [3 x 2.4 x 2.9 m] | (2x) Container 30′ [9.1 x 2.4 x 2.9 m] | Container 20′ [6.1 x 2.4 x 2.6 m] |
GAS Unit is the modular solution for gaseous biofuels production from solid organic biomass. Available in either skid-mounted or containerized version, starting from 130 Nm3/h, it comprises one or more gasification units, syngas cleaning and cooling, automatic biochar extraction, electrical panel and management software, gas supply ramp.
GAS Unit can be installed for existing biomass plants revamping or repowering, including traditional diesel or natural gas gensets.
| GAS Unit 130 | GAS Unit 260 | GAS Unit 520 | |
|---|---|---|---|
| Gas production / eq. kW | 130 Nm³ / 50 | 260 Nm³ / 100 | 520 Nm³ / 200 |
| Biochar | 4,2 kg/h | 8,4 kg/h | 16,8 kg/h |
| Biomass Consumption | 60 kg/h | 120 kg/h | 240 kg/h |
| Skid Version Dimensions | Skid 3.5×2.4 (m) | Skid 3.7 x 2.4 (m) | Skid 7.4×2.4 (m) |
| Container Version Dimensions | Container 10′ [3 x 2.4 x 2.9 m] | Container 20′ [6.1 x 2.4 x 2.6 m] | Container 30′ [9.1 x 2.4 x 2.9 m] |
The introduction of an innovative technology into existing processes requires a careful preliminary assessment, both technical and financial, as well as the certainty of carrying it out with a solid and structured partner capable of supporting you over time.
ReCare is RESET’s service program designed to simplify and support your innovation process, through a team of dedicated professionals and technicians: from the feasibility study to staff training for plant operation, after-sales services and spare parts supply.
